How To Clean A Carburetor On A Murray Riding Lawn Mower

Owning whatsoever type of power equipment volition require you to know some bones maintenance skills, including how to supervene upon a broken or lacking carburetor. In this commodity, we'll help you lot learn the steps of replacing a carburetor in a Troy-Bilt TB130 lawn mower.

Don't forget to shop for the carburetor used in this commodity, here! Removing the Carburetor

1. Remove the air filter cover and air filter

Unsnap the outer air filter cover and pull it and the air filter away from the engine.

ii. Remove the air filter base

Use a socket wrench to remove the two bolts on the air filter base, then disconnect the hose and pull the assembly abroad from the engine.

three. Turn off the fuel

To prevent fuel spilling out when removing the carburetor, twist the fuel valve (clockwise) to the 'off' position.

four. Remove the fuel line

Use a pair of needle-nose pliers to slide the hose clench away from the grommet.

Then use fuel line pliers to pull the fuel line off of the carburetor.

five. Remove the throttle linkage

Rotate the carburetor to unhook the throttle linkage.

6. Remove the carburetor

The erstwhile carburetor should now exist free to fix aside or throw away.

[Back to Meridian]
Installing the Carburetor

1. Replace the throttle linkage

Thread the throttle linkage into the new carburetor.

ii. Connect the fuel line to the carburetor

Utilise your fuel line pliers or your fingers to slide the fuel line back onto the carburetor.

And so use some needle-olfactory organ pliers to re-secure the hose clamp.

iii. Replace any damaged/former gaskets

Earlier you lot install your new carburetor, you'll want to inspect each gasket and supplant any that are damaged or cracked.

4. Reassemble the carburetor and air filter base

a) Slide the mounting bolts back through the air filter base.

b) Supercede the breather tube to the air filter base.

c) Slide the air filter base gasket onto the mounting bolts.

d) Slide the new carburetor onto the mounting bolts.

east) Install the heat shield gasket onto the mounting bolts.

f) Slide the isolator and isolator gasket onto the mounting bolts.

5. Mount the carburetor and air filter base of operations

Make certain the flap on the auto-choke system is placed on the right side of the peak post on the carburetor.

Then use a socket wrench to re-secure the air filter base of operations/carburetor assembly dorsum to the engine.

6. Reinstall the air filter

Identify the air filter into the air filter base of operations.

7. Replace the air filter comprehend

Snap the air filter comprehend over the air filter to finalize this repair.

[Back to Elevation]
Determination See! That was pretty easy, wasn't it? And most other engine repair are merely as unproblematic as this one. Then adjacent time you have a problem with your lawn mower, don't take it to a repair shop; repair it with eReplacementParts.com! Store for other Troy-Bilt TB130 lawn mower parts by browsing our parts pages. [Back to Top]
What We're About